Since 1951  
 
HYDRA-JUSTER
Inventor & Manufacturer
   
CAPABILITIES PRODUCTS PARTS QUALITY INFORMATION CONTACT ABOUT
 

CAPABILITIES

Steel Types

Heat Treating

Fabrication

Machining

Pattern Services

Cast Loop Forms

HYDRA-JUSTER

PARTS

Brush Rakes-Pin On Type

HYDRA-JUSTER Seals

Dozer Trunnion Parts for CAT

Weld-On Sprocket Rims

Equalizer Bars for CAT

Roller Stand Adapters

QUALITY

Chemical Testing

Non Destructive Testing

Physical Testing

Sand Testing

INFORMATIONAL

Brochures

Directions

Mission Statement

 
 

 
Non Destructive Testing (NDT) is a term used for the examination of materials and components in such a way that allows materials to be examined without changing or destroying their usefulness. Henderson Manufacturing Company performs the following types of non destructive testing:
 

Visual Inspection:

  Visual inspection is the one NDT method used extensively to evaluate the condition or the quality of a weld or component. It is easily carried out, inexpensive and usually doesn't require special equipment.  
     

Magnetic Particle Inspection:

Magnetic particle inspection is a method that can be used to find surface and near surface flaws in ferromagnetic materials such as steel and iron.  
     

Ultrasonic Inspection:

Ultrasonic inspection uses sound waves of short wavelength and high frequency to detect flaws or measure material thickness.  
     

Radiographic Inspection:

X-ray or gamma rays are placed close to the material to be inspected and they pass through the material and are then captured on film This film is then processed and the image is obtained as a series of gray shades between black and white. Careful inspection of the film will reveal internal flaws that may not be found by other inspection methods.